Use a paperclip to press the physical Reset button on the side of the camera. If it remains unresponsive, repeat Method 1 using a completely fresh download of the firmware file on a newly formatted card. "Card Error" Appears After the Update
ROVE provides two primary methods to update the R2-4K firmware. You can choose the method that works best for you.
If available, tap UPDATE Firmware . A progress bar will appear on the dash cam screen. rove r2-4k firmware update
Reset your G-Sensor to "Low" or "Medium" to prevent normal driving vibrations from locking files and filling up your card.
Not always, but it is highly recommended. If you are experiencing specific bugs (like Wi-Fi or GPS issues), or if ROVE announces a critical update for your model, you should install it. You can always check if an update is needed by entering your serial number on the ROVE support website. Use a paperclip to press the physical Reset
You will need a computer with an internet connection and a MicroSD card reader. Step-by-Step Guide to Updating Rove R2-4K Firmware
Unplug the power. Remove the SD card. Use a paperclip to press the Reset button on the side of the device. Re-insert the card with the firmware file and try powering it on with a different power brick. LEDs Do Not Flash / Camera Boots Normally Cause: The camera cannot read the firmware file. You can choose the method that works best for you
Are you experiencing a (e.g., freezing, loop errors) that prompted you to look for an update?
Drive around the block to ensure the camera loops video seamlessly and the GPS log stamps your location data accurately.
Insert the MicroSD card containing the firmware file into the camera.
Ensure the firmware file is named correctly and sits in the root directory, not inside a subfolder. If the file extension says .bin.txt , rename it to remove the .txt . "Card Error" Displayed Post-Update