Amada Pega 357 User Manual //top\\

Clean the slug conveyor and empty the scrap bins to prevent slug pulling or backing up into the dies. Every 100 Hours (Weekly)

Measure the gap between the mechanical clutch and brake pads. Over-clearance causes slow cycling or double-tripping.

(H-type thick turret), including two auto-index stations to handle complex angles without custom tooling. Control System: It typically runs on the Fanuc 04PC control , a reliable industry standard for CNC turret operations. 2. Critical Safety Protocols The manual emphasizes that only qualified personnel should operate or service the machine. Power-Up Safety: amada pega 357 user manual

"Hand me the 14mm wrench," Elias commanded. Miller, intrigued despite his skepticism, obeyed.

G92 X72.000 Y50.000 ; (Establishes worksheet size origin) G00 T204 ; (Rotates turret to station 204) X10.500 Y12.250 ; (Moves sheet to punching coordinate) G27 X10.500 Y12.250 ; (Executes punch stroke) G50 ; (Return home and end) Use code with caution. Daily Operation and Preventive Maintenance Clean the slug conveyor and empty the scrap

Used for executing registered programs automatically from the NC memory during production runs.

Never place hands inside the turret area while the hydraulic pump is running. The turret can index automatically without a punch cycle. (H-type thick turret), including two auto-index stations to

If your Pega 357 setup utilizes an oil chiller to regulate the temperature of the hydraulic system, coils should be cleaned regularly to ensure optimal thermal stability. 🔗 Where to Access and Download Manuals