A: Set boot order in BIOS → UEFI Boot Order. The S100i driver only controls drives attached to its SATA ports.
The is an entry-level, driver-based software RAID solution integrated into HPE ProLiant Gen10 servers .
Always download from official HPE Support Center to ensure compatibility. Installation Scenarios Scenario 1: Installing During Windows Server 2022 Setup
. Since this is a software-based RAID solution, the driver is not included in standard Windows installation media; you must manually provide it for the installer to recognize your logical volumes. Hewlett Packard Enterprise Essential Driver Information hpe smart array s100i sr gen10 driver windows server 2022
To install the driver, follow these steps:
: Use the HPE Smart Storage Administrator (SSA) GUI or CLI to configure and monitor your arrays. Since the S100i is a "RAID-only" controller, individual physical drives are masked from the OS and only logical volumes are exposed.
By following the steps and best practices outlined in this guide, you can successfully deploy and manage the HPE Smart Array S100i SR Gen10 controller on Windows Server 2022. A: Set boot order in BIOS → UEFI Boot Order
; it is not supported if the server is configured for Legacy BIOS. Hewlett Packard Enterprise Quick Comparison: vs. SR100i
Right-click it, select , and view the Driver tab to check the provider (should be HPE) and the driver version. Manual Update
Microsoft did not include a built-in driver for the S100i because the controller was released years before Windows Server 2022. Consequently, Windows Server 2022 will NOT detect any drives connected to the S100i without manually loading the driver. Always download from official HPE Support Center to
Search for your specific server model (e.g., ProLiant DL360 Gen10 or MicroServer Gen10 Plus ) or search directly for the "S100i Windows Server 2022 driver".
For a significantly easier and more automated experience, HPE recommends using . This tool is integrated into all HPE ProLiant Gen10 servers and is accessible by pressing F10 during the system boot process.
Navigate to > BIOS/Platform Configuration (RBSU) > Storage Options > SATA Controller Options .
April 20, 2026 | Category: HPE, Storage, Windows Server