To unlock a bootloader, the phone must be booted into Fastboot (Bootloader) mode. When your phone is in Fastboot mode, the standard Android OS is completely shut down, meaning Termux cannot run.
Plug the into the host phone (the one running Termux). Connect the standard USB data cable to the OTG adapter. Plug the other end of the data cable into the target phone .
The target phone will turn off and boot into a screen that usually displays a dead Android robot or the words "Fastboot Mode". Step 6: Execute the Unlock Command unlock bootloader using termux link
What is the exact of both your host phone and target phone?
On the target device, you will usually see a confirmation screen. Use the to highlight "Unlock the Bootloader" and the Power Button to confirm. Troubleshooting Common Link Issues To unlock a bootloader, the phone must be
This usually means Termux does not have direct access to the host phone's USB hardware layers. Try unplugging and re-plugging the OTG cable, changing the USB connection mode in the host phone’s notification shade to "File Transfer," or running Termux inside a proot Linux environment.
Plug the into your Host Device (running Termux). Connect the standard USB data cable to the OTG adapter
Unlock Bootloader Using Termux Link: The Complete Step-by-Step Guide
An adapter that plugs into the Host device, converting its port to a female USB-A or standard Type-C port.