Airbot Hypersonic: Pro Manual

Only charge the vacuum using the original power adapter provided by Airbot. Do not attempt to use third-party chargers.

without the dust cup and filters properly installed in place.

Do not allow dust to exceed the "MAX" line marked on the canister. Turn off the vacuum. Hold the dustbin over a trash can. airbot hypersonic pro manual

Holds the vacuum and primary accessories while charging. Power Adapter: Multi-voltage charger. Technical Specifications Motor Power: 420W Brushless DC Motor Suction Pressure: Up to 34,000 Pa (Pascal) in Turbo mode Battery Capacity: 7-cell 2500mAh Lithium-Ion battery Dustbin Capacity: 0.8 Liters Filtration: 5-stage fully sealed HEPA filtration system

Toggle through speeds to manage suction based on the surface (e.g., lower speed for hard floors, higher for carpets). Using the Intelligent Display Only charge the vacuum using the original power

Hold the vacuum over a trash can and press the located on the bottom of the canister. The flap will spring open to drop the dirt. Washing the Filters (HEPA & Stainless Steel Mesh)

Attach the motorized brush head to the other end of the pipe. Do not allow dust to exceed the "MAX"

Use a pair of scissors to cut away wrapped hair or threads along the built-in groove.

Equipped with six 2200mAh lithium batteries for extended cleaning sessions.