Need to speak to someone? Ametek Brookfield’s technical support team is available Monday–Friday. Reference your instrument’s serial number and the manual revision for fastest service.

If you are searching for a direct, safe, and official , you have come to the right place. Below, we provide not only the link but also a detailed breakdown of why you need this manual, how to use it effectively, and what critical information it contains.

Instructions on using the built-in Peltier plate for precise temperature ramps (crucial for paints, resins, and polymers).

Place a small amount of sample on the plate, lower the cone, and ensure the gap is set properly.

Choose a cone geometry (Cone 01 through Cone 10) that aligns with your expected viscosity range.

Brookfield CAP 2000+ Operations Manual . Quick Start Guide: CAP 2000+ Quick Start Guide .

This high-shear cone and plate instrument is primarily used for rapid viscosity testing in industries like paints and coatings. Below is a detailed breakdown of the manual's core operational and maintenance procedures.

To find the manual link for the CAP 2000 Viscometer, you can try the following:

Requires less than 1 mL of sample, perfect for expensive materials.

Running multi-speed verification tests to ensure the internal torque sensor responds accurately across its full scale. Troubleshooting Common CAP 2000+ Errors

: Always lift the unit by the base console or column ; never lift it by the handle or head.

Often caused by a worn pivot point, a bent spindle, or improper sample volume. Refer to the manual's maintenance section to verify spindle runout.

: This specific manual is intended for instruments with a serial number beginning with "CPN" . If your unit has a "CP" prefix, you must contact Brookfield directly for a legacy manual. Safety and Maintenance BROOKFIELD CAP 2000+

Requires less than 2 mL of fluid (typically 0.1 mL to 1.0 mL depending on the cone geometry).