Kolbus Da 36 Manual -

Purge the vacuum lines and clean out any paper dust or fibers collected by the filters. Weekly Maintenance

The Kolbus DA 36 was built for medium to high-volume production of hard book covers, rigid box components, and files. Below are the standard mechanical parameters for the machine: 405 x 560 mm Minimum Opened Case Size: 110 x 155 mm Spine Insert Width: 8 mm to 80 mm Maximum Speed: Up to 36 cycles per minute

Reduce air pressure; check static eliminator bars; fan out the paper pile manually. Loose cloth tension or uneven glue application. Kolbus Da 36 Manual

Calibrate the double-sheet detector to the specific thickness of the new cover material. Step 5: Gluing Unit Calibration

The gluing unit operates at high temperatures. Wear heat-resistant gloves and protective eyewear when handling hot-melt glue or cleaning the glue pot. Purge the vacuum lines and clean out any

The (e.g., heavy cloth, laminated paper) you are running

Remove any trimmed spine paper or board dust from the machine chassis. Weekly Tasks Loose cloth tension or uneven glue application

[Feed Cover Sheet] ➔ [Apply Hot Glue] ➔ [Place Boards & Spine] ➔ [First Fold / Turn-in] ➔ [Corner Tuck] ➔ [Side Fold / Pressing]