The battery is at its optimum level when the needle reaches a constant low reading (note: it may never reach zero). Thermal Protection:
Lets you choose between a slow/maintenance charge (trickle charge) and a fast charge setting.
Clean the battery terminals with a wire brush and reconnect. If it persists, the battery may be sulfated and unable to hold a charge. Excessive fast charging or blocked vents
The battery may be dead or sulfated. Try a desulfation cycle or have it tested. Internal overload bradex bx60 battery charger instructions high quality
Wipe the copper jaws of the clamps after use to remove any transferred battery acid or grease.
Plug the AC power cord of the Bradex BX60 into a grounded electrical outlet. The charging process will begin automatically. Step 5: Monitor Progress
: The rugged build is ideal for garage environments where it might take a few bumps. The battery is at its optimum level when
Park your vehicle in a well-ventilated area. If possible, remove the battery from the vehicle, placing it on a stable, non-conductive surface away from flammable materials. Clean the battery terminals of any corrosion or dirt to ensure a good electrical connection.
Designed to get a vehicle started quickly. This usually takes 2 to 6 hours. Avoid leaving the charger on the fast setting indefinitely to prevent overheating.
The charger will automatically detect whether the battery is 6V or 12V. The LED lights will indicate the charging status. Step 4: Charging and Maintenance If it persists, the battery may be sulfated
Switchable between 12V and 24V systems.
The needle on the ammeter should jump to show the current being delivered (closer to 4A if the battery is flat).