Rok Power Washer Instructions [upd] Jun 2026

Remove the unit, handle, spray gun, wand, and high-pressure hose from the box.

Only after the pressure is "zeroed out" should you disconnect the hoses. Store the unit in a dry place, and if you live in a cold climate, ensure it is drained of all water to prevent internal freezing damage.

By following these comprehensive instructions, you can ensure that your ROK power washer will be a reliable and effective tool for years to come. Remember, the machine's performance is a direct result of how well you set it up, use it, and care for it. Happy cleaning! rok power washer instructions

Switch the unit to the ON position (labeled "1" or "I").

Starting procedures differ based on whether you own an electric motor or a petrol-driven ROK pressure washer. For Electric ROK Models Remove the unit, handle, spray gun, wand, and

Avoid spraying directly into electrical outlets, switches, or light fixtures. 2. Assembly and Initial Setup

Check that the water inlet filter is clean and free of debris. Connect Hoses: Switch the unit to the ON position (labeled "1" or "I")

Start spraying at least 1–2 feet away from the surface. Slowly move closer until you find the sweet spot where dirt lifts without damaging the material.