Usb Device Id Vid 1e3d Pid 198a !!top!! [ 2025-2027 ]

The Product ID corresponds to the Chipsbank CBM2099 series of USB mass-storage controllers. More precisely, PID 198A is often associated with the CBM2099E or CBM2099S variant.

The Chipsbank CBM2099 controller (VID 1E3D / PID 198A) is neither good nor bad – it’s an entry-level, functional piece of silicon. For $5-10, a new USB 3.0 drive from a reputable brand (SanDisk, Samsung, Kingston) will offer better performance and reliability. However, if you enjoy tinkering with firmware tools and recovering seemingly dead hardware, the CBM2099 is a great learning platform.

For the most serious issues, only software used at the factory will work. This is where the comprehensive information from the VID/PID becomes invaluable, as it tells you which tool is compatible. These powerful tools, commonly referred to as "量产工具" (mass production tools), can perform low-level formatting and re-flash the controller's firmware.

The device appears to the host computer as a composite USB device. When connected via USB, it typically loads drivers that bridge the connection to the diagnostic software. While the device supports wireless operation, the USB connection (identified by this VID/PID) is often used for firmware updates or in environments where radio interference is a concern. Usb Device Id Vid 1e3d Pid 198a

In the world of USB hardware, every device contains two critical identifiers:

198A (Commonly assigned to Flash Disks and Flash Readers) Device Type: USB 2.0 Mass Storage Device Common Controllers: CBM2098, CBM2099E, CBM2199S 🛠️ Common Use Cases & Behavior

Keep the device plugged in until the loading progress indicator changes to a green or Success banner. Advanced Troubleshooting: The Hardware Test Mode The Product ID corresponds to the Chipsbank CBM2099

Performance varies significantly by the specific flash memory used; user tests report read speeds between 10–48 MB/s and write speeds between 3–17 MB/s Common Issues and Recovery

The hardware identifiers and PID 198a correspond to a USB Mass Storage Device manufactured by Chipsbank Microelectronics Co., Ltd. This specific combination points directly to a flash drive or card reader powered by a Chipsbank controller, most commonly the CBM2199E or CBM2199S microcontroller chipsets. For $5-10, a new USB 3

: Use APTool (the emergency tool). When APTool finishes successfully, restart UMPTool and perform a final low-level format.

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

If the device shows up as 1e3d 198a but is inaccessible and requires initialization, the controller chip might be corrupted. If you have important data on the drive, try using file recovery software, but be aware that a faulty controller chip often indicates a failed drive.

Seeing on your system is not a cause for alarm. It is the signature of a Chipsailing fingerprint sensor, typically found in Chinese-brand laptops or external biometric dongles. The main challenge is driver availability – and most users can resolve this through optional Windows Updates, generic biometric drivers, or their laptop manufacturer’s support page.