Click the respective buttons in Odin and select the extracted files:
Click and select the file starting with AP_ . (Note: Loading the AP file may take a minute or two as Odin verifies the file integrity. Do not close the application.) Click CP and select the file starting with CP_ .
Click on the slots in Odin and select the corresponding files from your extracted firmware folder:
When you find your firmware file, it will likely be a compressed .zip archive. Extract it, and you should see a .tar or .tar.md5 file. samsung n920f flash file
Flashing firmware modifies core system partitions and carries inherent risks if done incorrectly. Complete the following checklist before proceeding:
Flashing the official Samsung N920F flash file rewrites every partition – from the bootloader to the system partition – providing a clean slate.
A flash file is the core operating system of your phone. You may need to flash your phone using a computer if it experiences any of the following problems: Click the respective buttons in Odin and select
Once you've identified your device's true model, use it to search for the firmware on reputable sites:
Are you facing a specific or symptom on your phone (e.g., FRP lock, bootloop)? Which version of Odin are you intending to use?
Press and hold the buttons simultaneously. Click on the slots in Odin and select
Clearing system junk and restoring performance. Prerequisites: Preparing for the Flash Before flashing, ensure you have the following in place:
Flashing a stock firmware—often referred to as a “flash file” or “stock ROM”—is the most effective way to restore a Samsung device to its original software state. It can fix boot loops, remove malware, revert unwanted modifications, and even revive a bricked phone. For the , however, the process is more complicated than for most Galaxy models. This guide explains everything you need to know, from verifying your device’s true identity to safely flashing the correct firmware.
Samsung Odin3: How to use Odin to Install Stock Firmware/ROM
The real hardware model is often displayed in Download Mode, even if the software has been modified.
Download and install the latest Samsung USB Drivers on your PC to ensure the device is recognized. Download Odin Tool: