[best] - Nalco 77352 Sds

. Due to its high toxicity, strict adherence to safety protocols is mandatory. Health Hazards

The active constituent is a mixture of 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-4-isothiazolin-3-one . The European Chemical Agency (ECHA) sets the concentration of the active substance (CMIT/MIT 3:1 mixture) as ≤ 2.5% .

Lena’s exhaustion evaporated.

Avoid contact with strong oxidizing agents (e.g., chlorine, peroxides), strong bases (e.g., sodium hydroxide), and reactive metals such as aluminum, brass, or carbon steel, as corrosion can occur.

Do not rely on generic summaries. You must have the manufacturer’s official document on hand. Here are the four legitimate channels:

Nalco 77352 is a clear, light-yellow liquid with a pungent odor. It is completely soluble in water, making it easy to dose into liquid-based industrial systems. The technical specifications of the product include: 2.0 to 5.0 (acidic) Specific Gravity: 1.01 – 1.03 at 20°C Density: Approximately 8.5 lbs/gal Viscosity: 3 cps at 25°C

According to the NALCO 77352 safety guidelines , proper storage is vital to prevent accidents:

NALCO® 77352 (also registered as NALCO® 77352NA) is primarily utilized to maintain optimal heat transfer efficiency and prevent microbial corrosion in industrial open-recirculating, closed-loop cooling towers, and air washers.

Nalco 77352 is a broad-spectrum, non-oxidizing biocide primarily used to control bacteria, algae, and fungi in industrial water systems. According to the Safety Data Sheet (SDS), it is classified as a chemical that causes irreversible eye damage and skin burns . Critical Safety & Handling

“What’s this?” asked Marco, the new intern, peering at the drum. The liquid inside was a clear, faintly amber fluid with no immediate smell. “Corrosion inhibitor?” he guessed.

Spills of NALCO 77352 require prompt and safe management to protect personnel and the environment.

Understanding the Nalco 77352 Safety Data Sheet (SDS) is a proprietary, broad-spectrum, non-oxidizing biocide designed to control bacteria, algae, and fungi in industrial water systems. Often referred to as NALCO 77352NA , this chemical is essential for maintaining heat transfer efficiency and preventing biofouling in systems like cooling towers and brewery pasteurizers.

In the event of accidental exposure, immediate action is required to mitigate tissue damage and systemic toxicity:

Immediately flush eyes with plenty of water for at least 15 minutes, lifting upper and lower eyelids. Seek immediate medical attention .

The transport classification for NALCO 77352 (CMIT/MIT mixture) is: